Key Points: The iPhone 3GS battery is replaceable, but the process is simpler than with modern iPhones, requiring some basic tools.
Important Reminder: Safety First:iPhone 3GS Smartphone Battery are at risk of swelling, leakage, or fire. Ensure your phone is off before proceeding, and avoid puncturing or bending the battery during the process.
Backup Your Data: Even though it’s just replacing your iPhone 3GS battery, it’s wise to back up your iPhone data before any repair. Professional Repair: If you’re not confident in your ability to do it yourself, leaving it to a professional repair shop is the safest and quickest option.
Overview of DIY Replacement Steps
Tools and Materials You’ll Need:
Special Screwdriver: The iPhone 3GS uses a Pentalobe screw (size P2) to secure the back cover. This was one of the first tamper-proof screws Apple used.
New iPhone 3GS Smartphone Battery: A compatible iPhone 3GS battery (typically model 616-0529).
Pry Bar or Plastic Pry Tool: Used to separate the back cover and disconnect the battery connector. Phillips screwdriver: Used to unscrew the small screw on the battery connector cover.
Steps in summary: Power off. Unscrew the two Pentalobe screws at the bottom. Open the back cover: The back cover slides off and lifts from the top of the screen towards the bottom. Carefully pry it open with your fingernail or a plastic pry tool through the gap between the screen and the back cover. Disconnect the iPhone 3GS battery: The internal structure is very intuitive. The battery is located in the upper left corner and is secured to the motherboard via a connector. First, unscrew the small Phillips screw securing the battery connector cover, then remove the cover. Pry up the connector: Carefully pry the iPhone 3GS Smartphone Battery connector off the socket using a plastic pry tool or your fingernail.
Remove the old battery: The battery is secured by two adhesive strips at the bottom. Slowly and evenly pull these two strips horizontally to easily remove the iPhone 3GS battery. Do not pry the battery forcefully.
Install the new battery: Apply new battery adhesive, place the new battery in its original position, connect the battery cable, reinstall the cover, and tighten the screws.
Testing: Do not install the back cover yet. Power on the phone to test if the battery is working properly and if the iPhone 3GS Smartphone Battery can be charged.
Assembly: After confirming everything is correct, power off the phone. Slide the back cover back in as before and secure it. Finally, tighten the two screws at the bottom.
616-0434 1250MAH Battery Replacement for Apple iPhone 3GS
Apple 616-0434 battery replacement for Apple iPhone 3GS with a capacity of 1250MAH Te battery is a brand new and it is compatible with 100% original and replacement battery. Wholesale and retail of Apple 616-0434 battery is of high quality and low price！Each Apple 616-0434 battery undergoes thorough quality checks before dispatch for you location. This ensures that you get a reliable, tested High quality product that meets the highest standards.
All kinds of Apple Cell Phone batteries and chargers at batteryforpc.co.uk. Apple Cell Phone Battery with wholesale or retail is high quality & low price. Get 30% off buy Apple Cell Phone battery.”