Apple’s iPhoneXS successor is shaping up to be equal parts familiar and
unprecedented. Rumors point to a device that mixes the notched design and
form-fitting displays of the previous two generations with an all-new glass
back and triple-camera module at the rear.
unprecedented. Rumors point to a device that mixes the notched design and
form-fitting displays of the previous two generations with an all-new glass
back and triple-camera module at the rear.
New renders, provided by prominent industry
leakster Stever Hemmerstoffer — a.k.a https://www.batteryforpc.co.uk/— and https://www.batteryforpc.co.uk/, are now shedding some
light on how that new glass back could look. The mockups depict a single sheet
of glass that covers the entirety of the back, pouring over the sides and
seamlessly extending over top of the three cameras.
If
true, this would be a small but noteworthy departure from previous iPhones,
which broke up the camera module from the rest of the body using a metal ring.
Because there are no seams to be found in this particular render, that
unsightly squarish camera bump doesn’t look nearly as conspicuous as it had in
previous illustrations.
true, this would be a small but noteworthy departure from previous iPhones,
which broke up the camera module from the rest of the body using a metal ring.
Because there are no seams to be found in this particular render, that
unsightly squarish camera bump doesn’t look nearly as conspicuous as it had in
previous illustrations.
Ultimately, it could be a great way for
Apple to “hide” the eyesore of an imaging stack in the upcoming iPhones — something
Cupertino is reportedly interested in doing, according to a story that emerged last week.
Aside
from that creative use of glass, these new renders tip off a redesigned mute
slider — one that slides an a direction parallel to the frame, instead of the
up/down motion of the current switch — as well as bezels that have been ever so
slightly trimmed down. However, 9to5Mac cautions that the
discrepancy in bezel size is not significant enough to be especially
noticeable.
from that creative use of glass, these new renders tip off a redesigned mute
slider — one that slides an a direction parallel to the frame, instead of the
up/down motion of the current switch — as well as bezels that have been ever so
slightly trimmed down. However, 9to5Mac cautions that the
discrepancy in bezel size is not significant enough to be especially
noticeable.
Accordingto CashKaro, the replacement for the 5.8-inch iPhone XS will measure 143.9
millimeters long, 71.4mm wide and 7.8mm thick. Technically, that would be a bit
wider and thicker than the current model, at 70.9 mm and 7.7 mm, respectively —
though obviously too small a difference to mean anything for the device’s
proportions.
millimeters long, 71.4mm wide and 7.8mm thick. Technically, that would be a bit
wider and thicker than the current model, at 70.9 mm and 7.7 mm, respectively —
though obviously too small a difference to mean anything for the device’s
proportions.
